The installation of drywall is not only to attach it to the surface, but it will be considered unfinished if the seams between the sheets are not embedded. This is necessary for subsequent finishing work. To hide the seams, use putty, which is sold in construction stores, both in the form of dry mixes and ready to use. For work, you will need a reinforcing tape and spatulas of various sizes. Before starting repairs with your own hands, you should find out everything about construction and repair on construction portals so that the repair is not made to make mistakes.
The work begins with the fact that with the help of a narrow putty, putty fills the seam between the sheets of drywall. Then, a reinforcing tape is attached to the seam, it is well pressed on a raw putty, trying not to press it inside the seam. The tape should be straightened along the entire length, without wrinkles and folds. At this stage, the work is suspended until the putty mixture is completely stained with, at least a day. After that, a layer of frozen putty must be thoroughly filled with a spatula, removing all the excess. Further, another layer of putty is applied in order to equalize the level of the surface of the drywall with the level of the suture. It is possible to achieve this, you need to apply more than one layer of putty. The final moment will grind the surface of the seam with sandpaper.
