LED fiber is widely used in commercial structures that use it for lighting in restaurants, cafes or hotels. But in the modern world, LED lighting is used in ordinary apartments and houses, especially in bedrooms, children’s and bathrooms. You can buy an already assembled device, or you can assemble it with your own hands, which will not take much time. In the future, we will consider how to install the ceiling using LED fiber: – On a sheet of plywood with a thickness of no more than 10-16 mm, we cut the contour of the future ceiling and drill the holes. The number of holes should coincide with the number of fiber threads, and the thickness of the drill should be equal to the thickness of the threads;
Want to know more about pneumatic transport, but don’t know where? We advise you to visit ours and find out all the information you are interested in about pneumatic transport.
For the side of the ceiling, we take the plywood a little thinner – 5 mm. We choose the width of the strips in the height of the ceiling provided in your design. Small bars, which will be needed for fastening; – on the inside we put the fiber and fix the remaining ends with the help of glue;- we fix the LEDs with adhesive tape so that they can not get out of the edges during installation, and paint, without paying attention to the sticking ends;- we use nippers or soldering iron to eliminate non-aesthetic tips. Now you can start direct installation with self -tapping screws.
