Acrylic baths are now becoming more and more popular. Do acrylic baths differ in composition? If so, how significant is this difference?
There are three main types of acrylic baths according to the production method:
1. Fiberglass covered with helium.
2. Acrylic, reinforced with fiberglass.
3. Acrylic, reinforced by compositional material.
These products have approximately the same strength, wear resistance and sound insulation, and scratches that appeared on them are quite easily eliminated. Small difference in products arise due to different production technologies.
So, fiberglass covered with helium. Bathrooms made using this technology have high strength and wear resistance. In the technological process, it is important to use high -quality components and observe the desired temperature regime, in which the gel is applied to the fiberglass, which has already been given the necessary shape.
Acrylic baths No. 2 and No. 3 are cast from large pieces of acrylic. Such products are also called bathrooms made of cast acrylic. So what happens in the process of making a bath. The sheet heats up and softens, then stretches into the desired shape. It is because of the process of stretching that a production marriage may occur, too thin areas. It is important to consider this moment when buying a bath, as well as look at the manufacturer, since such a drawback is not always successful.
The third type of acrylic baths appeared due to the fact that from time to time questions arose with acrylic baths related to the fact that their bottom was bending and bending, it was necessary to plant bathrooms on cement, etc. p. Acryl, reinforced by compositional material allowed to forget about this problem. By the way, the use of fiberglass also allowed the bottom to strengthen the bottom in acrylic baths and eliminate the problem.
