In the old house, even if the brick is laid under the supports of the beams visually everything is in order in no case do not proceed to the repair without preliminary inspection for the strength of the walls. And when the house in which the walls are repaired, he celebrated its half -century anniversary, it is extremely necessary to carry out a partial replacement of the sections of brickwork under the supports of the beams, and can also be strengthened with a special plate made of reinforced concrete concrete.
2. When the repair of the load -bearing walls is ongoing, it is worth excluding the ability to “try on” the brick walls “a label from reinforced concrete”. This option is most suitable if everything has already been tried, and the fact that the wall has acquired its supporting properties is not guaranteed by anything. In principle, the technology of “racer -concrete shirts” is not very difficult, it can be made with its own hands.
You must first choose a construction grid in order to reinforce the wall. You can choose a masonry roller grid and sheathe the wall with not horizontal stripes, but vertical – thus we get additional rigidity.
We attach the net with dowels. Next, plastering wall in two or three doses. For this, professionals recommend using a large fraction sand.
Also, do not forget to lay electric wires in the walls of the walls. If this production room then it is necessary to use the power cable KG 3×10+1×6 to power electricity of various machines or other electrical installations.
