A country house is good, and the pond at the house is even better. This is one of the most common elements in the design of the personal territory. Ponds can be correct or with uneven shore lines. The first option is most often done slightly higher than the ground level with sides made by tile stone. And if a pond is planned, imitating natural, then the shore is covered with cobblestone or large pebbles. By the way, it is best to take the original spare parts to take the original, so as not to lose as. The place for the pond should be calm, illuminated 8 hours a day. This will help plants in the pond to take root well. There are 3 types of materials for waterproofing the pond: 1. Hard capacities. Usually their fiberglass or plastic is made. The disadvantage is the limited size of the reservoir (no more than 4 m. sq.), also the walls are not very thick (about 3 mm), which reduces strength.2. Film waterproofing. A buttonage, polyethylene film is used. The main advantage is unlimited in size and forms. Disadvantages: it is easily torn, destroyed under the influence of ultraviolet radiation.3. Reinforced concrete. The most expensive, but the most durable and reliable option. Ponds from this material are resistant to any climatic effects. But in this case, to be prepared for laborious installation and high cost.
