As we all know, laminate is perhaps one of the most successful inventions of the construction market. He can not only replace an expensive parquet, but also practically in no way inferior to him. But, if we are familiar with many ways to lay parquet, then what to do with a laminate. So that you do not have difficulties with its installation, we decided to tell you in detail how to make the perfect floor from the laminate. So, for this you will need a laminate itself, a special substrate, and a hammer with a rubber tip. As for the substrate, it can be several types. Ordinary and reflecting. The latter should be laid where the floors are mostly cold. Note that their thickness may also differ. But the children’s bed will interfere with it during repair it is best to move it.
There are two ways to lay laminate. The first, in contrast to the second, implies the absence of additional adhesion in the form of glue. With any method, the laminate is laid with a small shift, so that later there is a masonry, like a brick wall. On all sides, the board has special grooves or locks. Shooting one in the other, you seem to snap it. Thus, the entire floor in the room should be laid out. As for the hammer, it is required for a denser adhesion of the boards among themselves.