Beginning developers who decided to build a house themselves, it is recommended to lay out a brick wall before its main masonry, make a trial masonry of a brick wall, which is 1.2 meters size. With its help, they can check the flow rate of the solution, and a texture type of seams. The first rule: before starting work with is probably the most common material in construction – brick. Before he put him in a row, he must be lowered into the water.
Allows you to clean it from dust accumulated on it, and is ahead of the stretching of moisture from the already finished solution. With rapid dehydration of the solution, a poor bundle of it with brick occurs, which can reduce the resistance of the wall masonry.
You can sometimes observe in some places behind areas in which bricks are not connected to the solution, and areas where microcracks appear.
It is necessary to prepare the required amount of solution and water. In the process of work, moisture may gradually evaporate from the solution, and periodically, so there is a need to dilute it with water.
If the solution begins to grasp, then its use is made unacceptable in order to qualitatively build the walls in your house from brick. The use of the solution, with a large excess of water, is also an unacceptable solution.
In order to evenly distribute the dropped solution on its surface, use acceleration. It is appropriate for this to use a cell.
The brick is laid with sliding motion on the solution and adjusted to the nearest brick to fill the vertical seam with a solution. If the gap between the bricks in the vertical seam is formed, then it will be filled with additional portions of the solution.
For the exact and dense fit of the brick, the Kelma handle taps on it a little on it. You can also use a special hammer. Then the extra excess solution is removed from the edges. It is certainly worth taking care of a good protection of the realized brick wall. Then, if this is not done before the solution is already stabilized, and masonry will come to the rain, it is possible that the components that will subsequently lead to the appearance on the wall of highs will penetrate it, and the brick wall will acquire an ugly view.
There are rules for laying bricks for the facade that are required. Following these rules, you can guarantee the desired result.
Be sure to determine the level, number of layers and thickness of the seams.
In order to align all the outer rows of a stretched rope and apply the level.
Lay out the first brick in a “dry” way. This is necessary to check the thickness of the seam, which is planned and possible brick sizes.
Always remember these simple rules, if you are going to put the walls of brick walls yourself.