With increasing energy prices in our time, the question of insulation of the walls of the houses is the most relevant. Studies have shown that up to 50% of heat enters through the walls of the houses. When warming the walls, you can reduce these losses to 30%, while reducing the gas fee. Scientists also proved that the best method of insulation is the external. There are plenty of materials for wall insulation and a leader among other methods can be called a polyphasad system, which becomes very popular every year. This type of insulation is economical, environmentally friendly, and fast in installation.
Polypasad is a universal technology 2 in 1 for the decoration and insulation of buildings, when installing which you can forget about the use of a bark beetle, since the plate of the polyfase, after installation, do not require subsequent processing. Polypase slabs, the size of which is 50 by 50 and weighing 4.5 kg have two -layer protection. Decorative – protective layer, the thickness of which is 15 mm, and the manufacture of which comes from high -quality white cement. The second layer, the thickness of which is from 2 to 20 cm thermal insulating.
Installation technology is very simple: first you need to set the start profile, which should be installed horizontally. It is recommended to use an even timber or a profile pipe. After installing the profile pipe, we begin to mount the first row of polyphase. When laying several rows, you need to leave vertical and horizontal, so -called technological seams. Which are then sealed with plastic plates up to 2 mm thick.
After the adhesive lighthouses drying out in the technological seams, holes for anchor mounts with the calculation of four anchors per stove are drilled. After the complete completion of the installation of the polyphasade, you need to do it mandatory about priming the slabs, and after the primer completely dried, you can safely start painting your house.
