Of course, it would be possible to write instead of such an article instead of such an article that they say, guys, plastic windows and do not laugh people, every fall engaged in window insulation. And even if you especially like the tree in the interior, then certainly – in the normal interior, it is definitely not the case that was made from which Soviet window frames were made ..
But, Ce La Vi – not everyone still has the opportunity to purchase coveted plastic, and therefore the report on how it is easier and more efficiently to warm the windows for the winter – to be!
The easiest way is to do as follows: to twist from old newspapers a tourniquet moistened with water in advance. This tourniquet should be cut into the cracks, and just seal with paper on top. But this is a very aggressive version of insulation. In the spring of the window, most likely you will have to repair. This insulation will need to be hard to tear off the window frames.
There is another, but less dangerous way. In return for the wet newspaper, use cotton wool or foam rubber, gluing with fabric stripes on top . Stripes about 5 cm wide. it is possible to cut out of an old unnecessary sheet. Wet it, then squeeze and soap. Next, the fabric is glued to the cracks. In this option, the windows will practically not suffer in the spring.
You can also insulate these windows using a conventional paraffin. First it is heated in a water bath. Then take a syringe and heat it, for a short time lowering it into hot water. Then they type paraffin and inject it into the gaps, as well as windows. The syringe is of course used without a needle.
It is also possible to apply the most ordinary linen cord as a heater as a heater. This is possible if the gaps have a fairly uniform width. The cord is clogged simply into the gap, using some kind of acute tool, knife, awl and so on.
