Also, with the penetration of orphans inside, the process of destruction of the wall is significantly accelerated. Black spots of mold will be clearly visible on the wall. Do not forget that mold and fungus are very poorly affected by human health.
You can, for example, carry out cosmetic repairs and re -pacify the wallpaper by processing the frozen walls with a special antiseptic, but this will help only until the next winter, because the problem itself is not solved, why the walls freeze, but only the consequences.
Therefore, so that the walls do not freeze them need to be insulated. It is generally accepted that it is better to insulate the walls from the outside of this wall, but, unfortunately, due to the complexity of the skin and the thermal insulation materials used, it is not always possible to perform such insulation. Here in such cases, when external insulation of the wall is not possible to perform internal, by applying a layer of “warm” plaster. The thickness of the applied layer of plaster should be at least 3 cm. And in order to achieve high quality work, it is worthwhile to first clean the surface of the wall from the layer of old plaster.
If it is decided to leave the old plaster, then it is mandatory strengthened by the frame of reinforcement, and then the grid is pulled. Today, metal and fabric stacks are most often used. The process of plastering the wall is performed in several stages. Each layer of the solution is applied alternately, and then only after drying the previously applied layer. The process of insulation of the wall from the inside with the installation of drywall is completed. Well, to avoid excessive air humidity set vapor barrier and Paris. To do this, it will be enough to lay a layer of a building film as a steam tap. And before applying the plaster to the wall, apply a layer of waterproofing primer.