The most convenient and reasonable option is to lay a cable under the material designed for the interior decoration of the room. Imagine the situation: you need to install air conditioning in the kitchen, and you planned to install a source of uninterrupted food on the other end of the room. Carry out the cord openly – it will be ugly, and not particularly safe. The best option is to hide it under the wallpaper. How – now we will consider.
To do this, we need a minimum set of tools:
Bulgarian with an abrasive circle-drill for the circuit mark
Hammer-scarpel for knocking out a strobe
Skill for alignment
First, take a pencil and draw the direction of the cable throughout its length. Next, we mark the contour of the stroobes (up to 5 centimeters deep, depending on the thickness of the processed wall, can also be determined using an electrical tube with the desired section size), knock out, in fact, the stroke itself using a hammer-hammer and align everything with elementary sandpaper. In places of fastening of sockets/distribution boxes/switches, you will need a drill with a nozzle for cutting holes. Tunnels for pipes are created using a perforator.
All boxes, shields, pipes and the like, fasten on a special solution of alabaster. If the finish is carried out by the gap, you can place the electrical tube under it. After laying the surface of the wall, level the plaster. Nothing is required.
