Guides in the construction, according to which the screeds are aligned when pouring concrete solution – are called beacons. If they are qualitatively exhibited, then the screed will be made in accordance with all construction standards. For the most part, the repairs in the rooms begin precisely with such a screed of the floors. The easiest option is used to screed the floor – classic, from six to thirty millimeters. The work is very difficult in physical terms, although it is no complexity. It is important to calculate in the process the correct amount of the solution set the beacons by which the mixture will be tightened. By the way, new children’s furniture has now appeared in Yekaterinburg, which is recommended to install after repair.
First you should prepare the surface: the old coating is removed from the floor, and if the old screed does not suit you, then it should also be replaced with a new one if it will be “baked”. The main thing is that the master should evaluate the old screed, because if you are not badly versed in this, you will not be able to evaluate you. If the screed is perfectly preserved, then it is quite possible to directly perform a bulk floor on it. In the event that the old screed is baking and all overwhelmed, then it is better, of course, to change it. This can be done using a large perforator (it should be quite heavy) and some efforts will be required. Next, you should remove all the garbage from the floor surface and prepare it for further work. You should find the highest point using the level. You can use a hydraulicarian and set the beacons.
The beacons can be made of various material, but it is better to use special ones that I have a special T-shaped guide, which is provided specifically for the floor screed. Such beacons should be exposed upside down. The process of exposing the beacons itself is quite complicated, and it is the outcome of all work with the floor that at this stage of work will be most careful as possible.