A cement screed laid on a tree quickly cracks and flies away. To avoid this, it is done by a thick. From the weight of the floors, you need to refrain when the house has wooden coatings. Due to the large flow rate of the solution, and subsequently the weight of the cement screed should not be carried out in general in an old house with a wooden coating. About one hundred kilograms of solution can go by one square meter, which is significantly reflected where there is apartment accommodation, where the loads of concrete can feel the neighbors living below. As a fence, you can use fences from corrugated board, which are very durable.
Instead, ceramic tiles are laid. But first you need to engage in waterproofing the floor. To do this, you can use polyethylene or special solution. For waterproofing of wooden surfaces, Polyfluid is also suitable. The placed gypsowinyl sheet should joke on the boards, and not on the cracks. After the gypsovinyl sheet is screwed to the boards with self -tapping screws, it is treated with a primer to deeply penetrated. Ceramic tiles are laid on top. The gypsum sheet has high strength, hardness and fire-technical characteristics. Therefore, this sheet is used to increase fire resistance of wooden structures.