To improve the appearance of windows, doors, walls, etc. D., As a rule, it is necessary to apply paint in several layers to get a strong, long -term coating. The layers of paint should be imposed exactly one on the other, and the drying time provided for by the instructions should be accurately survived. Only latex paint allows you to apply the second layer 60 minutes after the first. The frequency of applying new layers depends on the painted surface, the operational properties of the painted object and the type of paint materials. Concrete floors Coloring new floors. Thoroughly washed with water and well -dried floor is covered with two layers of latex primer paint and one layer of enamel varnish paint for floors. Coloring of the old sexes. The well -peeled floor is previously covered with a layer of latex paint for the floors and lacquered in one layer of oil paint for the floors. Wooden floors first color. The wooden floor is thoroughly cleaned of dust and other contaminants. In order to paint the floor with oil paint, you need to first dry it.1. The color of the Olifoy.2. Coloring latex paint for floors.3. Varnishing enamel varnish paints for floors. Coloring with oil paints. Primed the surface of the Oliphi, depending on the covering ability to apply one or two layers of oil primer “paint for the floors and then varnish enamel varnish paint for the floors. Coloring of the old sexes. The floor is thoroughly cleaned of dust and wax remaining from the gap. After that, cover the dry floor with a layer of oil primer for floors, and varnish with one layer of enamel varnish paint for floors. Varnishing can be done no earlier than 12 hours after the preliminary coating with a brush. External wood. Latex paints in conjunction with oil paints or alkidine resin are used for painting on wood. Wooden surfaces subject to atmospheric influences should be processed especially carefully and according to all the rules, so that their operational properties are preserved for a long time. Since the windows and balcony doors, when fluctuations in temperature, fog and damp, they need to be covered not only from the outside, but also from the inside. Coloring of a new surface. The tree before coloring should be clean and dry. Coloring with oil paints or alkidia resin -based paints. Mark Oliphoi once. Olifa, who after two hours has not yet been absorbed into a tree, for example, in the place of knots, is removed with a rag moistened in a solvent. Then, twice primed with oil paint or, with an alkyd tar with alkyd smell, and varnish with one layer of oil paint or alkaline -based varnish -based varnish. Coloring the old surface. The exfolved paint is removed with a spatula, a wire brush, a soldering lamp or a grassy solution. The hard first layer is sanded with fine -grained sandpaper. Surfaces should be clean and dry. Coloring with oil paints or alcohol -based paints. Propure 1-2 times with oil paint or alkyd resin for external work and varnish once with oil enamel paint or enamel paint based on alkyd resin. The internal color of the tree. First primed wooden surfaces designed for staining. Flotted loose paint and varnish materials knock down, burn or remove with etching. Durable coatings should be grinded with sandpaper. Alkyd resin -based painting. Cover 1-2 layers of soil paint based on alkyd resin and one layer of enamel varnish paint for internal work. The outer color of steel. The steel parts before painting should be thoroughly cleaned of rust with a wire brush and an sandpaper 6umag. Coloring. Primed the surface with one layer of oil primer. After the primer, apply the first layer of oil anti -corrosion primer paint, one layer of anti -corrosion enamel paint. The internal coloring of steel. Pre -processing of steel parts is carried out in the same way as with external staining of steel. Coloring with oil paints. Pre -apply 1-2 layers of oil primer for internal work, and then one layer of enamel lacquer paint, painting on an alkyd base. Pre -apply 1 – 2 layers of soil paint based on alkyd resin, and then one layer of enamel varnish paint on a alkyd base. For painting central heating batteries, special covering paint on a alkyd resin for batteries is best suited. On batteries primed with oil anti -corrosion paint, a layer of governing paint is applied specifically for batteries. Staining basements of new basements. Carefully cleaned surfaces should be withstanded at least four weeks in only then the first layer of paint, otherwise, as a result of alkaline reactions, the applied layer of paint may collapse. Oil, basement painting. Cover the surface with a layer of olifa, and then 1-2 layers of oil basement for internal coloring. Marking. The boundary of the paint in the basement of the wall is marked using the cord. To do this, the cord is extended through a folded piece of paper, into which the ash powder from the burned paper is poured into the powder. Two people stained in this way are held tightly in a certain place. If now the cord is pressed against the wall, and then let go, the marking strip will remain on the wall. The boundary of the paint will be kept especially accurately if before painting in the place of marking, stick a sticky tape, which is removed after the paint dries.