Before staining, we purchase several dyes of the right shades. As a rule, such dyes are created on the basis of natural materials and when used change the chemical composition of concrete. The color palette is monotonous and does not differ in a large amount, but it ranges from dark brown to green shades. The main thing is to remember that such dyes change only the color of concrete itself, but not sand or stone, so if there is crushed stone in the solution, then the color will not work uniformly. By the way, you know that wooden houses are being repaired less often than brick or frame, which is why wooden houses are most often built.
The wall is treated with a solvent. If it had paints, a primer or glue, then it can be painted uneven. After that, we proceed to the preparation of the room itself. It should be remembered that you work with acid – which means that it can cause damage to any material, so you need to be extremely careful. Do not forget to protect yourself: put on old clothes, gloves and glasses. The dye is poured in small portions into the container and applied to the wall with a sponge or brush. If you want to see a plain wall, then it must be covered with one layer of dye. As a rule, a liter of dye can be painted about five to six square meters of wall.