Depending on the purpose of the site, the method of laying the coating is also chosen. For places of entrance of cars, a base is made with a tightly tamped crushed stone or gravel, on which a layer of sand, stones and ceramic elements are laid. For paths designed to move tenants, a base is made of tightly tamped sand.
Looking for paving stones? We advise you to buy a paving stones at the given link.
Regardless of the type of coating, the golden rule of the transverse slope is used. For all coatings, the slope should be at least 3%, so that the water will flow freely into grass or lawn, as a result of which the tracks will dry faster. If you do not create the desired slope, then after rain you will have to walk on the puddles. Any available ceramic products are used for the upper coating of paths and sites: clinker brick, paving stones, cement slabs. Depending on the general decoration of the garden, in places with low intensity for the upper coating of the site, specially impregnated wood is used. The wood can be laid in the form of flooring, or cut rounds, which are buried in the ground. Such a coating looks very good in the garden. The only restriction when choosing a coating is the right choice of coating with the best characteristics.
