Plastering is one of the most important stages of decoration of any room. On a small area, this process is performed manually, in large rooms it is recommended to use the machine method of applying plaster, which has many advantages over manual application.
Firstly, the use of cars allows you to do work in one day, for which a team of three people will need a whole week.
Secondly, the supply of plaster is under pressure, which provides higher adhesion (coupling), increases the bearing capacity and resistance to mechanical damage.
Third. Knighting the solution also occurs using a machine, and this makes it better, without air bubbles and with uniform mixing of all components.
Fourthly, machine plastering is 20-30% cheaper than manual, as it saves materials and time.
Plastering using a machine consists of several stages. First, the surface is prepared – aligned, cleaned, dried. A clean and dry surface provides a more even application and a longer service life.
After that, the surface is primed, paying special attention to the corners, and the beacons and guides are installed. If it is necessary to protect the corners and protruding surfaces, expose special metal corners. And finally, they apply the plaster, which is wiped as they dry out. All these works allow you to get a flat and smooth surface.