The most popular way to use drywall sheets is a suspension ceiling. Before installing drywall on the ceiling, it is necessary to decide on which way you will fix it. Two types of installation are currently most common. This is gluing and mounting to a metal or wooden crate with self -tapping screws (screws). At the first, little time and money will be spent, with the second ceilings from drywall will cost a little more. During installation, the main materials are brackets, reinforcing ribbons, suspensions, profiles, compensators and seals, vibro -carriers and much more. When installing plasterboard sheets on the ceiling, one cannot do without it, at first glance, trifles like rubber seals, because in the future there is a creaking and gncing of the metal for metal.
Having prepared a crate and plasterboard sheets, having secured with assistants who have screwdrivers in their hands (in no case, because the repair will take much more effort and time) start installing a drywall on the ceiling. The heads of screws by about 1 mm are heated in a drywall sheet and then, along with the joints, are neatly covered with putty. Perhaps very rarely, you can find a room or room, for repair or installation of a gypsum plasterboard ceiling of which would use a certain number of drywall sheets. Therefore, in most cases, we will cut drywall, the price of the ceiling from this will not change because all the pieces will come in handy. Drywall cutting can be done using a building level, for example, with a clerical knife.
At the end of the work of the seams, the joints must be puttled by putty, the so -called “shovnik”, after which we proceed to the multi -layer finish putty and then clean it with sandpaper paper. Of course, the installation of drywall on the ceiling will take a lot of strength, but the result will be impressive.
